Will IP restrictions in Salesforce cause issues with Spanning Backup?

Spanning Backup for Salesforce requires access to your Salesforce data in order to protect it.

There are two groups of internet protocol (IP) addresses that need to be accessible:  

  1. Those to allowlist in your Salesforce settings
  1. Those to be accessible through your network router firewall

The data centers below correspond to where your Spanning Backup is installed.

IP addresses to allowlist in your Salesforce settings

For the US data center only:

  • 54.152.23.60
  • 52.20.87.69

For the EU data center only:

  • 52.19.180.247
  • 52.18.40.12

IP addresses that require access through your network router firewall

NOTE  Configure these addresses for access through port 443.

For all data centers:

  • 52.45.240.136
  • 34.226.115.252
  • 52.21.174.57
  • 54.88.242.219
  • 34.230.211.162
  • 54.236.85.102

For the US data center only:

  • 52.203.101.181
  • 52.3.157.100
  • 54.88.167.175
  • 34.207.40.173
  • 34.200.10.213
  • 54.83.183.251

For the EU data center only:

  • 52.49.43.234
  • 54.171.244.226
  • 52.209.79.33
  • 34.251.189.72
  • 52.50.113.19
  • 54.229.0.77
  • 54.229.94.213
  • 54.229.236.31

If you have any questions, please contact support through: https://one.kaseya.com/support